Misorientation, defined as the minimum angle through which the crystal coordinate systems of two grains must be rotated to coincide, is a fundamental parameter for characterizing grain-boundary features in materials science. Many interfacial processes, however — slip transfer, twin transfer, and phase-transformation variant selection among them — do not require the global coincidence of crystal coordinate systems, but only the matching of local features such as slip systems, twin systems, or transformation variants. Classical misorientation therefore cannot directly indicate the propensity of these processes, and its applicability is confined to interfaces between grains of the same crystal system. In a recent study, ZHAO Zibo generalized misorientation as "the minimum angle required to bring a prescribed geometric feature of two grains into matching" and proposed the generalized misorientation, governed by the unified equation Dx·G1 = Rxy·Sy·G2, in which the feature-matching operator Dx determines the physical process under consideration. Classical misorientation is thereby recovered as the most restrictive special case under symmetry-operation constraints, whereas the slip misorientation θS, twinning misorientation θT, and phase-transformation misorientation θPT serve as concrete criteria for slip transfer, twin transfer, and variant selection, respectively.
The framework shares with interface-structure theories (e.g., CSL and O-lattice) the geometric core of a rotation angle toward a matching state: the former characterize what an interface is and how energetic it is, whereas the latter characterize whether and how readily a process can occur, the two being complementary. Energetically, θS constrains the residual Burgers vector left after dislocation transfer across the interface; the transfer barrier converges quadratically with θS, and the process probability responds exponentially to the barrier, so that minute differences in this geometric quantity are amplified into stark differences in probability. Building on this, the framework addresses three classical problems: (i) incorporating the θS distribution into the Hall–Petch relation so as to separate grain-boundary crystallographic differences from the empirical coefficient K and endow K with crystallographic content directly measurable by EBSD; (ii) replacing qualitative criteria such as a "common {110}" with θPT to provide a continuous characterization of the geometric constraints on grain-boundary variant selection; and (iii) using θS, θT, and θPT to furnish crystallographic screening criteria over all candidate slip systems for polycrystalline deformation compatibility, thereby bridging existing criteria such as the Schmid factor and m′ and describing the multi-mechanism coupling through which slip, twinning, and phase transformation are sequentially activated by orientation evolution. Preliminary statistics on titanium alloys are consistent with the framework's predictions, and computing codes for part of the generalized misorientations are openly available on the website of the Yuhua Institute of Advanced Materials. Extension to other material systems — including steels and nickel and magnesium alloys — and the construction of a misorientation–interface-energy database remain directions for future work. The paper was first published online on 6 November 2026 (DOI: 10.19728/j.issn1672-6634.2026090016) and was supported by a platform research project of the Sichuan Provincial Department of Science and Technology (2026YFPT0001).